Printfuse 50cm x 9.1m roll by Matilda's Own

Matilda's Own Printfuse is a pressure sensitive fusible stabiliser.

It can be repositioned many times; however once heat is applied, Matilda's Own Printfuse is permanently bonded to almost any fabric.

Print

• Prepare the print image to the correct size on your PC.
• Place one sheet of Printfuse into the printer tray and commence printing.
• Allow a few minutes for ink to dry.

Fuse

• Press the Printfuse to the wrong side of your fabric using a medium setting on your iron (no steam).
• The fusible side of Printfuse is the soft exposed side. Hold the iron in place for 3 seconds and then turn over and iron the fabric side.
• Once cooled, cut out your design.

Peel

• Peel back the protective release paper to reveal the sticky surface. It is best to let the applique cool before removing the paper.
•  Position the applique onto your quilt or garment and press into place. (Can be repositioned many times).
• When happy with placement, press both the applique side and the fabric side for the best bonding. (Bonds permanently to most fabrics)